NETxKNX OPC Server Software Version 3.5
OPC Server 3.5 for KNX Systems

The OPC is a standardized interface for FM, control and visualization systems.
The system provides the KNX with an efficient OPC interface, and makes possible to connect KNX components through this standardized interface to various control and visualization systems.

This software can be installed on any PC. The connection to the KNX can be realized through RS-232, USB or network interface.

• Up to 1000 IP gateways can be administrated
• several OPC Clients can be connected parallel
• All officially used EIS data types are supported
• UnifiedDriver Interface 
• Up to 100.000 and more telegram definitions (group addresses)
• High data transfer rate
• Multi-Project kernel
• Workspace Management – multiple workspaces can be administrated
• Event Processor – cyclic, time and event based actions can be defined in the OPC Server
• Link Manager - the administration of linked group addresses can be realized now directly in the OPC server
• KNX Telegram Overflow Manager – an extended Protection against overloading of KNX
• Real Database Refresh - automatically updates of the OPC server database
• Direct value polling of KNX devices for initializing the virtual model of the plant
• Extended NETxKNX MP Open OPC Studio3.5
• Additional address space - the real address of the data point consists of the logical EIB address and the IP address
• Data recording in the queue buffer - up to one million sent or received telegrams
• Current state of the whole system can be saved and will be loaded automatically when starting
• Online check of the consistency of all connected gateways
• Real-time view of the telegram traffic with clear text description and further information
• Simulation mode
• Virtual device handling
• New extension modules available
• used in the largest projects of the world
• ...